- EllipticArc - Static variable in interface com.esri.core.geometry.Geometry.GeometryType
-
- endPoint() - Method in class com.esri.core.geometry.ogc.OGCCurve
-
- endPoint() - Method in class com.esri.core.geometry.ogc.OGCLineString
-
- enumFillRuleOddEven - Static variable in interface com.esri.core.geometry.Polygon.FillRule
-
odd-even fill rule.
- enumFillRuleWinding - Static variable in interface com.esri.core.geometry.Polygon.FillRule
-
winding fill rule (aka non-zero winding rule).
- Envelope - Class in com.esri.core.geometry
-
An envelope is an axis-aligned rectangle.
- Envelope(Point, double, double) - Constructor for class com.esri.core.geometry.Envelope
-
Creates an envelope by defining its center, width, and height.
- Envelope(Envelope2D) - Constructor for class com.esri.core.geometry.Envelope
-
- Envelope(VertexDescription) - Constructor for class com.esri.core.geometry.Envelope
-
- Envelope(VertexDescription, Envelope2D) - Constructor for class com.esri.core.geometry.Envelope
-
- Envelope() - Constructor for class com.esri.core.geometry.Envelope
-
Constructs an empty envelope.
- Envelope(Point) - Constructor for class com.esri.core.geometry.Envelope
-
Constructs an envelope that covers the given point.
- Envelope(double, double, double, double) - Constructor for class com.esri.core.geometry.Envelope
-
Constructs an envelope with the specified X and Y extents.
- Envelope - Static variable in interface com.esri.core.geometry.Geometry.GeometryType
-
- envelope() - Method in class com.esri.core.geometry.ogc.OGCConcreteGeometryCollection
-
- envelope() - Method in class com.esri.core.geometry.ogc.OGCGeometry
-
- Envelope1D - Class in com.esri.core.geometry
-
A 1-dimensional interval.
- Envelope1D() - Constructor for class com.esri.core.geometry.Envelope1D
-
- Envelope1D(double, double) - Constructor for class com.esri.core.geometry.Envelope1D
-
- Envelope1D(Envelope1D) - Constructor for class com.esri.core.geometry.Envelope1D
-
- Envelope2D - Class in com.esri.core.geometry
-
An axis parallel 2-dimensional rectangle.
- Envelope2D() - Constructor for class com.esri.core.geometry.Envelope2D
-
- Envelope2D(double, double, double, double) - Constructor for class com.esri.core.geometry.Envelope2D
-
- Envelope2D(Envelope2D) - Constructor for class com.esri.core.geometry.Envelope2D
-
- Envelope3D - Class in com.esri.core.geometry
-
A class that represents axis parallel 3D rectangle.
- Envelope3D(double, double, double, double, double, double) - Constructor for class com.esri.core.geometry.Envelope3D
-
- Envelope3D() - Constructor for class com.esri.core.geometry.Envelope3D
-
- Envelope3D(Envelope3D) - Constructor for class com.esri.core.geometry.Envelope3D
-
- EnvSrlzr - Class in com.esri.core.geometry
-
- EnvSrlzr() - Constructor for class com.esri.core.geometry.EnvSrlzr
-
- equals(Object) - Method in class com.esri.core.geometry.Envelope
-
Returns TRUE when this geometry has exactly same type, properties, and
coordinates as the other geometry.
- equals(Object) - Method in class com.esri.core.geometry.Envelope1D
-
- equals(Object) - Method in class com.esri.core.geometry.Envelope2D
-
- equals(Object) - Method in class com.esri.core.geometry.Envelope3D
-
- equals(Geometry, Geometry, SpatialReference) - Static method in class com.esri.core.geometry.GeometryEngine
-
Indicates if two geometries are equal.
- equals(Object) - Method in class com.esri.core.geometry.Line
-
- equals(Object) - Method in class com.esri.core.geometry.MapGeometry
-
- equals(Object) - Method in class com.esri.core.geometry.MultiPoint
-
Returns TRUE when this geometry has exactly same type, properties, and
coordinates as the other geometry.
- equals(Object) - Method in class com.esri.core.geometry.ogc.OGCConcreteGeometryCollection
-
- Equals(OGCGeometry) - Method in class com.esri.core.geometry.ogc.OGCConcreteGeometryCollection
-
- Equals(OGCGeometry) - Method in class com.esri.core.geometry.ogc.OGCGeometry
-
OGC equals.
- equals(OGCGeometry) - Method in class com.esri.core.geometry.ogc.OGCGeometry
-
Deprecated.
- equals(Object) - Method in class com.esri.core.geometry.ogc.OGCGeometry
-
- equals(Object) - Method in class com.esri.core.geometry.Point
-
Returns TRUE when this geometry has exactly same type, properties, and
coordinates as the other geometry.
- equals(Point2D) - Method in class com.esri.core.geometry.Point2D
-
- equals(Object) - Method in class com.esri.core.geometry.Point2D
-
- equals(Object) - Method in class com.esri.core.geometry.Polygon
-
Returns TRUE when this geometry has exactly same type, properties, and
coordinates as the other geometry.
- equals(Object) - Method in class com.esri.core.geometry.Polyline
-
Returns TRUE when this geometry has exactly same type, properties, and
coordinates as the other geometry.
- equals(Object) - Method in class com.esri.core.geometry.Transformation2D
-
Returns True when all members of this transformation are equal to the
corresponding members of the other.
- equals(Object) - Method in class com.esri.core.geometry.VertexDescription
-
- esriSR - Variable in class com.esri.core.geometry.ogc.OGCGeometry
-
SpatialReference of the Geometry.
- estimateMemorySize() - Method in class com.esri.core.geometry.Envelope
-
- estimateMemorySize() - Method in class com.esri.core.geometry.Envelope2D
-
- estimateMemorySize() - Method in class com.esri.core.geometry.Geometry
-
Returns an estimate of this object size in bytes.
- estimateMemorySize(double[]) - Static method in class com.esri.core.geometry.Geometry
-
- estimateMemorySize() - Method in class com.esri.core.geometry.Line
-
- estimateMemorySize() - Method in class com.esri.core.geometry.MapGeometry
-
Returns an estimate of this object size in bytes.
- estimateMemorySize() - Method in class com.esri.core.geometry.MultiPoint
-
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCConcreteGeometryCollection
-
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCGeometry
-
Returns an estimate of this object size in bytes.
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCLineString
-
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCMultiLineString
-
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCMultiPoint
-
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCMultiPolygon
-
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCPoint
-
- estimateMemorySize() - Method in class com.esri.core.geometry.ogc.OGCPolygon
-
- estimateMemorySize() - Method in class com.esri.core.geometry.Point
-
- estimateMemorySize() - Method in class com.esri.core.geometry.Polygon
-
- estimateMemorySize() - Method in class com.esri.core.geometry.Polyline
-
- EVEN_ODD - Static variable in class com.esri.core.geometry.SimpleRasterizer
-
Even odd fill rule
- execute(Geometry, Geometry, SpatialReference, ProgressTracker) - Method in interface com.esri.core.geometry.CombineOperator
-
Operation on two geometries, returning a third.
- execute(GeometryCursor, ProgressTracker) - Method in class com.esri.core.geometry.OperatorBoundary
-
Calculates the boundary geometry.
- execute(Geometry, ProgressTracker) - Method in class com.esri.core.geometry.OperatorBoundary
-
Calculates the boundary.
- execute(GeometryCursor, SpatialReference, double[], boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorBuffer
-
Creates a buffer around the input geometries
- execute(Geometry, SpatialReference, double, ProgressTracker) - Method in class com.esri.core.geometry.OperatorBuffer
-
Creates a buffer around the input geometry
- execute(Geometry, ProgressTracker) - Method in class com.esri.core.geometry.OperatorCentroid2D
-
- execute(Geometry, ProgressTracker) - Method in class com.esri.core.geometry.OperatorCentroid2DLocal
-
- execute(GeometryCursor, Envelope2D, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorClip
-
Performs the Clip operation on the geometry set.
- execute(Geometry, Envelope2D, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorClip
-
Performs the Clip operation on a single geometry.
- execute(GeometryCursor, boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorConvexHull
-
Calculates the convex hull.
- execute(Geometry, ProgressTracker) - Method in class com.esri.core.geometry.OperatorConvexHull
-
Calculates the convex hull geometry.
- execute(boolean, Geometry, Polyline, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorCut
-
Performs the Cut operation on a geometry.
- execute(GeometryCursor, double, ProgressTracker) - Method in class com.esri.core.geometry.OperatorDensifyByLength
-
Performs the Densify operation on the geometry set.
- execute(Geometry, double, ProgressTracker) - Method in class com.esri.core.geometry.OperatorDensifyByLength
-
Performs the Densify operation on the geometry set.
- execute(GeometryCursor, GeometryCursor, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorDifference
-
Performs the Topological Difference operation on the geometry set.
- execute(Geometry, Geometry, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorDifference
-
Performs the Topological Difference operation on the two geometries.
- execute(Geometry, Geometry, ProgressTracker) - Method in class com.esri.core.geometry.OperatorDistance
-
Calculates distance between two geometries.
- execute(int, Geometry) - Method in class com.esri.core.geometry.OperatorExportToESRIShape
-
Performs the ExportToESRIShape operation.
- execute(int, Geometry, ByteBuffer) - Method in class com.esri.core.geometry.OperatorExportToESRIShape
-
Performs the ExportToESRIShape operation.
- execute(SpatialReference, GeometryCursor) - Method in class com.esri.core.geometry.OperatorExportToGeoJson
-
Performs the ExportToGeoJson operation
- execute(SpatialReference, Geometry) - Method in class com.esri.core.geometry.OperatorExportToGeoJson
-
Performs the ExportToGeoJson operation
- execute(int, SpatialReference, Geometry) - Method in class com.esri.core.geometry.OperatorExportToGeoJson
-
Performs the ExportToGeoJson operation
- execute(Geometry) - Method in class com.esri.core.geometry.OperatorExportToGeoJson
-
Performs the ExportToGeoJson operation.
- execute(SpatialReference, GeometryCursor) - Method in class com.esri.core.geometry.OperatorExportToJson
-
Performs the ExportToJson operation
- execute(SpatialReference, Geometry) - Method in class com.esri.core.geometry.OperatorExportToJson
-
Performs the ExportToJson operation
- execute(SpatialReference, Geometry, Map<String, Object>) - Method in class com.esri.core.geometry.OperatorExportToJson
-
Performs the ExportToJson operation
- execute(int, Geometry, ProgressTracker) - Method in class com.esri.core.geometry.OperatorExportToWkb
-
Performs the ExportToWKB operation.
- execute(int, Geometry, ByteBuffer, ProgressTracker) - Method in class com.esri.core.geometry.OperatorExportToWkb
-
Performs the ExportToWKB operation.
- execute(int, Geometry, ProgressTracker) - Method in class com.esri.core.geometry.OperatorExportToWkt
-
- execute(GeometryCursor, double, boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorGeneralize
-
Performs the Generalize operation on a geometry set.
- execute(Geometry, double, boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorGeneralize
-
Performs the Generalize operation on a single geometry.
- execute(int, Geometry.Type, ByteBuffer) - Method in class com.esri.core.geometry.OperatorImportFromESRIShape
-
Performs the ImportFromESRIShape operation.
- execute(int, Geometry.Type, JsonReader, ProgressTracker) - Method in class com.esri.core.geometry.OperatorImportFromGeoJson
-
Performs the ImportFromGeoJson operation.
- execute(int, Geometry.Type, String, ProgressTracker) - Method in class com.esri.core.geometry.OperatorImportFromGeoJson
-
Deprecated, use version without import_flags.
- execute(Geometry.Type, JsonReader) - Method in class com.esri.core.geometry.OperatorImportFromJson
-
Performs the ImportFromJson operation on a single Json string
- execute(Geometry.Type, String) - Method in class com.esri.core.geometry.OperatorImportFromJson
-
Performs the ImportFromJson operation on a single Json string
- execute(int, Geometry.Type, ByteBuffer, ProgressTracker) - Method in class com.esri.core.geometry.OperatorImportFromWkb
-
Performs the ImportFromWKB operation.
- execute(int, Geometry.Type, String, ProgressTracker) - Method in class com.esri.core.geometry.OperatorImportFromWkt
-
Performs the ImportFromWkt operation.
- execute(GeometryCursor, GeometryCursor, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorIntersection
-
Performs the Topological Intersection operation on the geometry set.
- execute(GeometryCursor, GeometryCursor, SpatialReference, ProgressTracker, int) - Method in class com.esri.core.geometry.OperatorIntersection
-
Performs the Topological intersection operation on the geometry set.
- execute(Geometry, Geometry, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorIntersection
-
Performs the Topological Intersection operation on the geometry.
- execute(GeometryCursor, SpatialReference, double, OperatorOffset.JoinType, double, double, ProgressTracker) - Method in class com.esri.core.geometry.OperatorOffset
-
Creates offset version of the input geometries.
- execute(Geometry, SpatialReference, double, OperatorOffset.JoinType, double, double, ProgressTracker) - Method in class com.esri.core.geometry.OperatorOffset
-
Creates offset version of the input geometry.
- execute(Geometry, Geometry, SpatialReference, String, ProgressTracker) - Method in class com.esri.core.geometry.OperatorRelate
-
Performs the Relation operation between two geometries using the DE-9IM matrix encoded as a string.
- execute(Geometry, Geometry, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorSimpleRelation
-
Performs the given relation operation between two geometries.
- execute(GeometryCursor, SpatialReference, boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorSimplify
-
Performs the Simplify operation on the geometry cursor.
- execute(Geometry, SpatialReference, boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorSimplify
-
Performs the Simplify operation on the geometry.
- execute(GeometryCursor, SpatialReference, boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorSimplifyOGC
-
Processes geometry cursor to ensure its geometries are simple for OGC specification.
- execute(Geometry, SpatialReference, boolean, ProgressTracker) - Method in class com.esri.core.geometry.OperatorSimplifyOGC
-
Processes geometry to ensure it is simple for OGC specification.
- execute(GeometryCursor, GeometryCursor, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorSymmetricDifference
-
Performs the Symmetric Difference operation on the geometry set.
- execute(Geometry, Geometry, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorSymmetricDifference
-
Performs the Symmetric Difference operation on the two geometries.
- execute(GeometryCursor, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorUnion
-
Performs the Topological Union operation on the geometry set.
- execute(Geometry, Geometry, SpatialReference, ProgressTracker) - Method in class com.esri.core.geometry.OperatorUnion
-
Performs the Topological Union operation on two geometries.
- executeOGC(int, String, ProgressTracker) - Method in class com.esri.core.geometry.OperatorImportFromGeoJson
-
Performs the ImportFromGeoJson operation.
- executeOGC(int, ByteBuffer, ProgressTracker) - Method in class com.esri.core.geometry.OperatorImportFromWkb
-
Performs the ImportFromWkb operation.
- executeOGC(int, String, ProgressTracker) - Method in class com.esri.core.geometry.OperatorImportFromWkt
-
Performs the ImportFromWkt operation.
- exportSpatialReference(int, SpatialReference) - Method in class com.esri.core.geometry.OperatorExportToGeoJson
-
Performs the ExportToGeoJson operation on a spatial reference.
- exteriorRing() - Method in class com.esri.core.geometry.ogc.OGCPolygon
-
Returns the exterior ring of this Polygon.
- extractScaleTransform(Transformation2D, Transformation2D) - Method in class com.esri.core.geometry.Transformation2D
-
Extracts scaling part of the transformation.